Garett Astro Wave ANC

Wireless Over-Ear Headphones

Press and hold the power button for approximately 3 seconds. When the headphones are switched on, the LED indicator will start flashing. When they are switched off, the indicator will go out.

Turn on the headphones, then open the Bluetooth settings on your phone. Select Garett Astro Wave ANC from the list of available devices. After the first pairing, the headphones may automatically connect to the most recently used device.

The headphones are compatible with devices running Android, iOS, and Windows. They can be used with phones, tablets, laptops, and desktop computers. Connection to a Garett smartwatch is possible with models running Android and supporting Bluetooth audio.

The declared Bluetooth connection range is up to 10 metres. Walls, other wireless devices, and physical obstacles may reduce the actual range.

Three modes are available:

• Bluetooth – wireless connection;
• PC – wired connection via the 3.5 mm jack port;
• Memory card – playback of audio files stored on a microSD card.

To switch between modes, press the power button twice.

The headphones limit the maximum sound level according to the selected mode:

• Preschooler – below 75 dB ±3 dB;
• Child – below 85 dB ±3 dB;
• Teenager – up to approximately 94 dB ±3 dB.

To change the mode, press and hold the Play/Pause button for approximately 3 seconds.

The Child mode is automatically activated each time the headphones are switched on.

ANC reduces the audibility of surrounding sounds. Transparency mode allows you to hear your surroundings more clearly while using the headphones. Transparency mode is active by default when the headphones are switched on. ANC can be enabled by briefly pressing the power button.

Yes. The headphones support Bluetooth calls and include a detachable microphone. The multifunction button can be used to answer, end, and reject calls.

The device supports microSD cards with a maximum capacity of 32 GB.

The battery has a capacity of 400 mAh and provides up to 28 hours of use. Actual battery life depends on factors including the volume level and the use of ANC, Bluetooth, and RGB lighting.

A full charge takes approximately 2 hours. During charging, the LED indicator lights up red and switches off once the battery is fully charged.

No. The headphones are not waterproof and must not be submerged in water or charged near water.

Turn on the headphones and leave them in pairing mode. Then press the multifunction Play/Pause button five times.

The LED indicator should light up red for approximately one second, flash three times, and then switch off. This indicates that the reset has been completed. After resetting the headphones, remove the previous pairing from your phone or computer and pair the devices again.